From 33e99935b0c4477f87aac470411056cb20b42a7f Mon Sep 17 00:00:00 2001
From: Galen Guyer <galen@galenguyer.com>
Date: Wed, 7 Dec 2022 13:49:41 -0500
Subject: Update i3 config

---
 modules/10-i3/i3status/config | 85 +++++++++++++++++++++++++++++++++++++++++++
 modules/10-i3/i3status/run.sh | 73 +++++++++++++++++++++++++++++++++++++
 2 files changed, 158 insertions(+)
 create mode 100644 modules/10-i3/i3status/config
 create mode 100755 modules/10-i3/i3status/run.sh

(limited to 'modules/10-i3/i3status')

diff --git a/modules/10-i3/i3status/config b/modules/10-i3/i3status/config
new file mode 100644
index 0000000..0c54f33
--- /dev/null
+++ b/modules/10-i3/i3status/config
@@ -0,0 +1,85 @@
+# i3status configuration file.
+# see "man i3status" for documentation.
+
+# It is important that this file is edited as UTF-8.
+# The following line should contain a sharp s:
+# ß
+# If the above line is not correctly displayed, fix your editor first!
+
+general {
+        output_format = "i3bar"
+        colors = true
+        interval = 1
+}
+
+#order += "ipv6"
+#order += "path_exists VPN"
+# order += "disk /"
+order += "cpu_usage"
+order += "memory"
+order += "volume master"
+order += "tztime holder__notif"
+order += "wireless _first_"
+order += "ethernet _first_"
+order += "battery all"
+order += "tztime local"
+
+tztime holder__notif {
+       format = "holder__notif"
+}
+
+wireless _first_ {
+        #format_up = "W: %ip (%essid %frequency %signal %bitrate)"
+        format_up = "W: %ip (%essid %frequency %bitrate)"
+        format_down = "W: DOWN"
+}
+
+ethernet _first_ {
+        format_up = "E: %ip (%speed)"
+        format_down = ""
+}
+
+path_exists VPN {
+        path = "/proc/sys/net/ipv4/conf/tun0"
+}
+
+battery all {
+	format = "%status %percentage %remaining"
+	format_down = "NO BAT"
+	path = "/sys/class/power_supply/BAT%d/uevent"
+	last_full_capacity = true
+	integer_battery_capacity = true
+	low_threshold = 20
+}
+
+disk "/" {
+        format = "%avail"
+}
+
+load {
+	format = "[%1min %5min %15min]"
+}
+
+cpu_usage {
+	format = "C: %usage"
+	max_threshold = 90
+	degraded_threshold = 75
+}
+
+memory {
+        format = "M: %used (%percentage_used)"
+        threshold_degraded = "25%"
+        threshold_critical = "10%"
+}
+
+volume master {
+	format = "V: %volume"
+	format_muted = "V: %volume (muted)"
+	device = "pulse"
+        #mixer = "Master"
+        #mixer_idx = 0
+}
+
+tztime local {
+        format = "%c"
+}
diff --git a/modules/10-i3/i3status/run.sh b/modules/10-i3/i3status/run.sh
new file mode 100755
index 0000000..dcb5ce0
--- /dev/null
+++ b/modules/10-i3/i3status/run.sh
@@ -0,0 +1,73 @@
+#!/usr/bin/env bash
+
+# This i3status wrapper allows to add custom information in any position of the statusline
+# It was developed for i3bar (JSON format)
+
+# The idea is to define "holder" modules in i3status config and then replace them
+
+# In order to make this example work you need to add
+# order += "tztime holder__hey_man"
+# and
+# tztime holder__hey_man {
+#        format = "holder__hey_man"
+# }
+# in i3staus config
+
+# Don't forget that i3status config should contain:
+# general {
+#   output_format = i3bar
+# }
+#
+# and i3 config should contain:
+# bar {
+#   status_command exec /path/to/this/script.sh
+# }
+
+# Make sure jq is installed
+# That's it
+
+# You can easily add multiple custom modules using additional "holders"
+
+function update_holder {
+  local instance="$1"
+  local replacement="$2"
+  echo "$json_array" | jq --argjson arg_j "$replacement" "(.[] | (select(.instance==\"$instance\"))) |= \$arg_j"
+}
+
+function remove_holder {
+  local instance="$1"
+  echo "$json_array" | jq "del(.[] | (select(.instance==\"$instance\")))"
+}
+
+function hey_man {
+  local rand_val=$((RANDOM % 3))
+  if [ $rand_val == 1 ] ; then
+    local json='{ "full_text": "Hey Man!", "color": "#00FF00" }'
+    json_array=$(update_holder holder__hey_man "$json")
+  elif [ $rand_val == 0 ] ; then
+    local json='{ "full_text": "Hey Man!", "color": "#FF0000" }'
+    json_array=$(update_holder holder__hey_man "$json")
+  else
+    json_array=$(remove_holder holder__hey_man)
+  fi
+}
+
+function notif {
+  if [[ "$(dunstctl is-paused)" == "true" ]]; then
+    local json='{ "full_text": "N: paused", "color": "#FF0000" }'
+    json_array=$(update_holder holder__notif "$json")
+  else
+    local json='{ "full_text": "N: active" }'
+    json_array=$(update_holder holder__notif "$json")
+  fi
+}
+
+_pre=""
+i3status | (read line; echo "$line"; read line; echo "$line"; while true
+do
+  read line
+  json_array="$(echo $line | sed -e 's/^,//')"
+  notif
+  echo "$_pre$json_array"
+  _pre=","
+done)
-- 
cgit v1.2.3